CCNP Enterprise - ENSLD

Designing Cisco Enterprise Networks (ENSLD) v1.0

CCNP Enterprise - ENSLD

Descrizione Corso

The Designing Cisco Enterprise Networks (ENSLD) v1.0 course gives you the knowledge and skills you need to design an enterprise network. This course serves as a deep dive into enterprise network design and expands on the topics covered in the Implementing and Operating Cisco® Enterprise Network Core Technologies (ENCOR) v1.0 course.

Prerequisiti

  • Basic network fundamentals and building simple LANs
  • Basic IP addressing and subnets
  • Routing and switching fundamentals
  • Basic wireless networking concepts and terminology

Obiettivi del Corso

  • Design Enhanced Interior Gateway Routing Protocol (EIGRP) internal routing for the enterprise network
  • Design Open Shortest Path First (OSPF) internal routing for the enterprise network
  • Design Intermediate System to Intermediate System (IS-IS) internal routing for the enterprise network
  • Design a network based on customer requirements
  • Design Border Gateway Protocol (BGP) routing for the enterprise network
  • Describe the different types and uses of Multiprotocol BGP (MP-BGP) address families
  • Describe BGP load sharing
  • Design a BGP network based on customer requirements
  • Decide where the L2/L3 boundary will be in your Campus network and make design decisions
  • Describe Layer 2 design considerations for Enterprise Campus networks
  • Design a LAN network based on customer requirements
  • Describe Layer 3 design considerations in an Enterprise Campus network
  • Examine Cisco SD-Access fundamental concepts
  • Describe Cisco SD-Access Fabric Design
  • Design an Software-Defined Access (SD-Access) Campus Fabric based on customer requirements
  • Design service provider-managed VPNs
  • Design enterprise-managed VPNs
  • Design a resilient WAN
  • Design a resilient WAN network based on customer requirements
  • Examine the Cisco SD-WAN architecture
  • Describe Cisco SD-WAN deployment options
  • Design Cisco SD-WAN redundancy
  • Explain the basic principles of QoS
  • Design Quality of Service (QoS) for the WAN
  • Design QoS for enterprise network based on customer requirements
  • Explain the basic principles of multicast
  • Designing rendezvous point distribution solutions
  • Describe high-level considerations when doing IP addressing design
  • Create an IPv6 addressing plan
  • Plan an IPv6 deployment in an existing enterprise IPv4 network
  • Describe the challenges that you might encounter when transitioning to IPv6
  • Design an IPv6 addressing plan based on customer requirements
  • Describe Network APIs and protocols
  • Describe Yet Another Next Generation (YANG), Network Configuration Protocol (NETCONF), and Representational State Transfer Configuration Protocol (RESTCONF)

Programma del Corso

  • Designing EIGRP Routing
  • Designing OSPF Routing
  • Designing IS-IS Routing
  • Designing BGP Routing and Redundancy
  • Understanding BGP Address Families
  • Designing the Enterprise Campus LAN
  • Designing the Layer 2 Campus
  • Designing the Layer 3 Campus
  • Discovering the Cisco SD-Access Architecture
  • Exploring Cisco SD-Access Fabric Design
  • Designing Service Provider-Managed VPNs
  • Designing Enterprise-Managed VPNs
  • Designing WAN Resiliency
  • Examining Cisco SD-WAN Architectures
  • Cisco SD-WAN Deployment Design Considerations
  • Designing Cisco SD-WAN Routing and High Availability
  • Understanding QoS
  • Designing LAN and WAN QoS
  • Exploring Multicast with Protocol-Independent Multicast-Sparse Mode
  • Designing Rendezvous Point Distribution Solutions
  • Designing an IPv4 Address Plan
  • Exploring IPv6
  • Deploying IPv6
  • Introducing Network APIs and Protocols
  • Exploring YANG, NETCONF, RESTCONF, and Model-Driven Telemetry

Calendario Corsi

Sedi dei corsi

  • Milano: Viale Monza, 7 - Piazzale Loreto
  • Bergamo: Via Zelasco, 1 - Piazza della Libertà
CORSO DATA INIZIO DATA FINE NOTE
Designing Cisco Enterprise Networks (ENSLD) v1.0 12/10/2020 16/10/2020 Iscrizioni Aperte

Condizioni di Iscrizione

La quota di partecipazione ai corsi è relativa a : lezioni (in presenza o a distanza), esercitazioni sui nostri laboratori, materiale didattico (KIT ufficiale Cisco)  e  certificato ufficiale CLP di conclusione de corso.

Pagamento in unica soluzione: € 3.500,00 + Iva  o 35 CLC  Crediti per la formazione Cisco! (La quota include il pranzo in un locale vicino)

Sei un nostro allievo? Sempre validi per te gli sconti Alumni e Friend's Bonus!                                                                                                                                                      
Le iscrizioni sono a numero chiuso e pertanto accettate con priorità d’arrivo fino ad esaurimento dei posti disponibili.
Le iscrizioni per tutti i corsi possono essere fatte direttamente online.

Iscriviti al corso

Dati personali

Dati per la fatturazione

Da compilare solo se diversi dai dati personali

Richiedo di iscrivermi al seguente corso Cisco

Giorni dei corsi