CCIE RS LAB BootCamp by Europa Networking

CCIE RS Lab BootCamp Course - Cisco Certified Internetwork Expert
CCIE Routing and Switching Lab Bootcamp Course
(Cisco Certified Internetwork Expert)
CCIE Version 4.0.

It is a superior specialization training program that provides to CCIE RS qualified technicians the most important and essential skills to take the Exam CCIE RS LAB. The training focuses on: Bridging and Switching, IP IGP Routing, BGP, IP and IOS Features, LAN Switching, IP Multicast, QoS and Security.

::|Program of Study

The course's program of study covers all the topics likely to appear on the CCIE R&S lab exam.

General Networking Theory:

Implement Layer 2 Technologies
1. Implement Spanning Tree Protocol (STP)
2. Implement VLAN and VLAN Trunking Protocol (VTP)
3. Implement trunk and trunk protocols, EtherChannel, and load-balance
4. Implement Ethernet technologies
5. Implement Switched Port Analyzer (SPAN), Remote Switched Port Analyzer (RSPAN), and flow control
6. Implement Frame Relay
7. Implement High-Level Data Link Control (HDLC) and PPP

Implement IPv4
1. Implement IP version 4 (IPv4) addressing, subnetting, and variable-length subnet masking (VLSM)
2. Implement IPv4 tunneling and Generic Routing Encapsulation (GRE)
3. Implement IPv4 tunneling and Generic Routing Encapsulation (GRE)
4. Implement IPv4 Open Shortest Path First (OSPF)
5. Implement IPv4 Enhanced Interior Gateway Routing Protocol (EIGRP)
6. Implement IPv4 Border Gateway Protocol (BGP)
7. Implement policy routing
8. Implement Performance Routing (PfR) and Cisco Optimized Edge Routing (OER)
9. Implement filtering, route redistribution, summarization, synchronization, attributes, and other advanced features

Implement IPv6
1. Implement IP version 6 (IPv6) addressing and different addressing types
2. Implement IPv6 neighbor discovery
3. Implement basic IPv6 functionality protocols
4. Implement tunneling techniques
5. Implement OSPF version 3 (OSPFv3)
6. Implement EIGRP version 6 (EIGRPv6)
7. Implement filtering and route redistribution

Implement MPLS Layer 3 VPNs
1. Implement Multiprotocol Label Switching (MPLS)
2. Implement Layer 3 virtual private networks (VPNs) on provider edge (PE), provider (P), and customer edge (CE) routers
3. Implement virtual routing and forwarding (VRF) and Multi-VRF Customer Edge (VRF-Lite)

LAN Implement IP Multicast
1. Implement Protocol Independent Multicast (PIM) sparse mode
2. Implement Multicast Source Discovery Protocol (MSDP)
3. Implement interdomain multicast routing
4. Implement PIM Auto-Rendezvous Point (Auto-RP), unicast rendezvous point (RP), and bootstrap router (BSR)
5. Implement multicast tools, features, and source-specific multicast
6. Implement IPv6 multicast, PIM, and related multicast protocols, such as Multicast Listener Discovery (MLD)

Implement Network Security
1. Implement access lists
2. Implement Zone Based Firewall
3. Implement Unicast Reverse Path Forwarding (uRPF)
4. Implement IP Source Guard
5. Implement authentication, authorization, and accounting (AAA) (configuring the AAA server is not required, only the client-side (IOS) is configured)
6. Implement Control Plane Policing (CoPP)
7. Implement Cisco IOS Firewall
1. Implement Cisco IOS Intrusion Prevention System (IPS)
2. Implement Secure Shell (SSH)
3. Implement 802.1x
4. Implement NAT
5. Implement routing protocol authentication
6. Implement device access control
7. Implement security features

Implement Network Services
1. Implement Hot Standby Router Protocol (HSRP)
2. Implement Gateway Load Balancing Protocol (GLBP)
3. Implement Virtual Router Redundancy Protocol (VRRP)
4. Implement Network Time Protocol (NTP)
5. Implement DHCP
6. Implement Web Cache Communication Protocol (WCCP)

Implement Quality of Service (QoS)
1. Implement Modular QoS CLI (MQC)
2. Implement Layer 2 QoS: weighted round robin (WRR), shaped round robin (SRR), and policies
3. Implement link fragmentation and interleaving (LFI) for Frame Relay
4. Implement generic traffic shaping
5. Implement Resource Reservation Protocol (RSVP)
6. Implement Cisco AutoQoS

Troubleshoot a Network
1. Troubleshoot complex Layer 2 network issues
2. Troubleshoot complex Layer 3 network issues
3. Troubleshoot a network in response to application problems
4. Troubleshoot network services
5. Troubleshoot network security

Optimize the Network
1. Implement syslog and local logging
2. Implement IP Service Level Agreement SLA
3. Implement NetFlow
4. Implement SPAN, RSPAN, and router IP traffic export (RITE)
5. Implement Simple Network Management Protocol (SNMP)
6. Implement Cisco IOS Embedded Event Manager (EEM)
7. Implement Remote Monitoring (RMON)
8. Implement FTP
9. Implement TFTP
10. Implement TFTP server on router
11. Implement Secure Copy Protocol (SCP)
12. Implement HTTP and HTTPS
13. Implement Telnet

Required:
CCIE RS Written 350-001 exam and a technical interview.

::Delivery Methods:
Courses blend distance and in presence activities (Blended Distance Learning). The total duration is 70 hours, about 20 hours in distance activities and 50 hours dedicated to in presence training. The training schedule may be arranged to meet your requirements.

::|Lessons comprise both theory and practical aspects and include:

* Presence classes (in our facility)
Our instructors are Network Engineers, Cisco certified and trained to employ methodological and teaching abilities.
* Interactive distance classes (with live presentations of instructors): Live presentations of instructors: participants join the class from office or home and attend the session as they were in a real classroom. Instructors and students can work together, be involved through voice or chat, and use materials available on line.
* Hands-on experience (in presence on our labs equipments) exercises and troubleshooting using Cisco equipment.
* Remote Lab (remote access to our lab equipments): Participants access our labs on the internet by entering their logins and passwords find challenging learning activities that include custom exercises and suggestions for study specially made by our instructors

::|Real Labs : No more simulators!! Here you learn with Real Labs!

In presence lessons are held in our facilities in north Italy: Milan  or Bergamo  

 customized calendars ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

Fees:

* Our prices are in Euros and don't include VAT/tax.

Our fees include in presence lessons (live presentations, exercises and troubleshooting in our real equipments lab),
access to the course material and Certificate of course completion.
Transport, accommodation, meals and other supplementary expenses are not included in the training fees.

Admission
Admission requirements: The completion of all the CCNP courses  or a valid CCNP, and a valid CCIP certification. Additionally a technical online or face-to-face interview is required for confirming the on line application.
Fill in the application on line form: "Application"
Applications will be confirmed by email.